It should be able to run just fine a WAMP serevr (i have not tried it though). You wold have to modify the $serialPath (located in index.php) to point at the appropriate windows COM port. On my LAMP serevr its set to /dev/ttyUSB0 so you would switch it to say COM1 . You would also have to make sure Apache has permission to write to the COM port.
Sonny G – Utah, USA
April 03, 2014 - 00:52
Hello, I have a 1481, i wanted to do some simple gain mods to, I read I can add a .01uF cap across the 1st cathode bypass resistor, I was wondering what you thought of this, and which resistor that is? Thank you for your time.
Jim Minnich – Goshen In
May 09, 2012 - 06:32
The schematic for the silvertone 1481 looks like it has no grid leak resistor for V1b. I believe that the 220K resistor right after V1a shoud be on the other side of the first .01 cap. to provide the grid leak for V1b.